| Oilfield Surface Facilities |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Learn more |
| TEL:+86-10-63591520 |
| TEL:+86-10-63591500 |
| Email: |
| webmaster@cptdc.cnpc.com.cn |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Part 7 Others | | 1. Flow Meter | | | | UF-Ⅱ Flow meter | DN: 80, 100, 150, 200, 250, 300, 400 mm
Accuracy: ±0.2%, ± 0.5%
Flow range: 12-2, 800 m3/h
Max operating temperature: +120 ℃
Material: ZG 25 for meter body, HT250 for wet parts, carbon bearing
Specially contoured tooth shape of a pair of spiral rotor resulting in no pulsation and low noise
Widely applied in petrochemical industry | | | | Series LC Oval Flow Meter | DN: Ф10, 15, 20, 25, 40, 50, 80, 100, 150, 200 mm
Flow range: 0.08-340 m3/h | | | | ● Data Sheet | | Material | Cast iron: (A) | Cast steel: (E) | Stainless steel:(B) | | Pressure (MPa) | 1.6 | 6.4 | 1.6，2.5 | | Temperature | -20 ℃-+100 ℃ | -20 ℃-+100 ℃ | -20 ℃-+80 ℃ |
| | | | Series OI Oval Flow Meter | Accuracy:±0.2%, ± 0.5%; repeatable error is less than 1/3 of intrinsic error limit
Measured media viscosity: 0.3-3, 000 mPa·s; for media's viscosity larger than 3, 000 mPa·s, a high-viscosity Oval flow meter is applicable. |  | | | Measured media temperature: 0-90 ℃ (for standard type), 90 ℃-110 ℃ (with a heat extension for high temperature type)
Body material: cast steel, stainless steel (F5: OCr18Ni12Mo2Ti; F8: OCr18Ni9Ti)
Flow range: | | | | ● Small-type flow meter: | | Basic type | OI03 | OI06 | OI1（K） | OI2 | | DN（mm） | 6 | 10 | 15（25） | 20 | | Rated flow rate (L/h) | 120 | 250 | 600 | 1, 800 |
| | | | ● Standard-type flow meter: | | Basic type | OI5（K） | OI1O（K） | OI50 | OI200 | OI40 | | DN（mm） | 5（32） | 25（40） | 50 | 80 | 100 | | Rated flow rate (m3/h) | 3 | 6 | 18 | 42 | 72 |
| | | | Series VA Vortex Flow Meter | DN for Clipping type: Ф25, 40, 50, 80, 100, 150, 200, 250, 300 mm
Flow range ratio: 10:1-10:
Accuracy:±1.0%
Repeatability: ±0.2%
Max Operating Pressure: 4.0 MPa
Fluid temperature: -40-+300 ℃
Applicable media: liquid , gas, steam ( saturated, overheated)
Shock-resistance: ≤1.0g
DN: Ф350-2, 000 mm
Model VA-X (D) Smart Vortex Flow Meter
Model VA-X: extant +24VDC Power
Model VA-X (D): internal power supply for more than one year
Six-digit LCD display, clear,
Model VA-Q submarine vortex flow transmitter is applicable in the wet and moisture environment or place where signal wire leads to the ground from water pipe.
Get more and better Call 0551-3422670. |  | | | | Bst Ultra-Sonic Flow Meter | Install outside the pipe; on site flow display;
Two categories
a: Time differential meter
Accuracy level: 1.0, 1.5
Flow range: 0.05 m/s-10.0 m/s
Pipe diameter: 8-3, 000 mm with a wall thickness of less than 35 mm
Measured media: clean liquids such as: water, supply, industrial water, cycled water, chemical solvents
b: Doppler meter:
Accuracy level: 1.0
Flow range: 0.3 m/s-10.0 m/s
Pipe diameter: 25-1, 400 mm with a wall thickness of less than 35 mm
Measured media: unclean liquids such as waste water, pulp, heavy oil , crude oil and two-phase or multi-phase liquids |  | | | | Mob Electro-Magnetic Flowmeter | Nominal diameter: 20-300 mm
Ambient temperature: -10 ℃-+45 ℃
Accuracy class: 0.5, 1
Flow range: within flow rate of 1-10 m/s, and may be extended to a flow rate of 0.5-10 m/s
Rated operational pressure:1.0,1.6, 2.5 MPa
Power supply: 220 VAC±10%, 50 Hz±5%
Output signal: 4-20 mA
Load resistance: 0-500 Ω
Applied for the measurement of Electro-conductive liquids. |  | | | | | | | | | | Page 1 2 3 4 5 6 7 |
|
|
|
|
|
|
|
|
|
|
|
|